Pallet 1.2mm SG2 Mig Wire 15kg Plastic Spool (72 Reels)

A copper coated solid wire suitable for single pass or multipass welding of unalloyed and low-alloyed carbon-manganese steels.

Good mechanical properties at sub-zero temperatures down to -40ºC.

Vacuum-sealed aluminium foil packaging to prevent moisture absorption.

Precision layer wound for superior wire feeding characteristics.

Typically used on boilers, industrial machinery, bridges, shipbuilding, automotive, rail, structural and engineering fabrications etc.

Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.

Test Certificates can be found online @wilkinsonstar247.com

Typical Base Materials

S185, S235, S275, S355 - Grade A, B, D, AH32 to DH36 - L210, L240, L290, L360, L240NB, L290NB, L360NB, L360QB, L240MB, L290MB, L360MB, L415MB - X42, X46, X52, X60 - P235T1, P235T2, P275T1 - P275T2, P355N - P235GH, P265GH, P295GH, P355GH - S275, S355, S420, S275M, S275ML, S355M, S355ML, S420M, S420ML*
* Illustrative, not exhaustive list

Standards
EN ISO 14341-A - G 42 3 C1 / G 42 4 M21 3Si1
AWS A5.18 - ER 70S-6

Chemical Composition % (Typical)
C% Si% Mn% P% S% Cu%
0.07 0.85 1.45 <0.025 <0.025 <0.35

Cr% Ni% Mo% Al% V% Zr+Ti%
<0.15 <0.15 <0.15 <0.020 <0.030 <0.15

Mechanical Properties (Typical)
Shielding Gas C1 M21
Tensile Strength 540 MPa 580 MPa
Yield Strength 440 MPa
460 MPa
Elongation 30% 26%
Impact Strength 70 J 90 J
Test Temperature -30ºC -40ºC
Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.

Welding Parameters
Ømm Current (A) Voltage (V)
0.60 mm 50-100 15-20
0.80 mm 60-200 18-24
1.00 mm 80-300 18-32
1.20 mm
120-380 18-34
1.40 mm 150-420 20-36
1.60 mm 220-500 28-38

Shielding Gases

EN ISO 14175 - C1, M21

Welding Positions

EN ISO 6947 - PA, PB, PC, PD, PE, PF, PG